The most common way of implementing a high-side power path or input switch is by using a MOSFET. Either an N-channel or P-channel MOSFET can be used as an input switch, each with a different driving ...

The power switch, usually a Field Effect Transistor (FET), is turned on and off by a switching controller IC that monitors the output of the switching regulator in a feedback control loop. This ...

Whether you want to control a couple of powerful LEDs, switch a USB device on and off, or drive a motor, somewhere in the picture, there’s usually a FET doing the heavy lifting. You might not be ...

Just a dumb switch. If you have a FET switch (mux) that can handle 1.25G, please let me know. Do you mean 1 to 12 channels? We don't have any 1:12 channels mux, but you can do with cascading,maybe you ...

However, recently the use of both single and dual-gate FETs has received considerable attention in the design of fast switches. Several configurations are possible to exploit the low-noise small ...

His solution is to add a P channel MOSFET which only allows power to flow when the polarity of the source voltage is correct. The schematic above shows the P-FET on the high side of the circuit.

Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOSFET Power Switch and Buck Regulator (Low-Side) is one product we needed at SparkFun, so we figured ...

Do you want to avoid having multiple power adapters for your project and your Arduino? The MOSFET Power Switch is one of those products that we needed ourselves at SparkFun, so we figured other folks ...

Researchers have demonstrated room-temperature ferroelectricity in single-element tellurium nanowires, providing a pathway ...

In a low-side MOSFET switching application with an inductive load, is there a requirement to protect the gate / gate driver from transients coming back through the MOSFET drain-gate capacitance, or is ...

Abstract: SiC Hybrid switch (HyS) combines low conduction loss of Si IGBT and low switching loss of SiC MOSFET, and the cost is closer to that of Si IGBT. The promising high performances of HyS will ...