UFCS 的物理层就是UART串口，几乎所有的MCU都自带UART串口硬件，这就让产品开发起来很简单了。而USB-PD 采用BMC编码 ...

You can’t get beyond 5 V with just resistors though – you’ll need digital communications over the CC line, using a protocol called USB PD (Power Delivery) – which lets a device and a PSU ...

Emarkers are basically memory chips that can talk USB PD protocol. They’re used in cables that are slightly fancier than normal, i.e. cables with high-speed capabilities like USB3 and ...

which integrates all the USB PD 3.0 standard communication protocol and timing requirements. The designer no longer needs to spend development time coming up-to-speed on these specifications. One ...

The USB PD Adapter is based on the cheap and easy-to-use CH224K multi fast charging protocol power receiving chip, the INA219 voltage and current sensor IC, and an ATtiny204, 214, 404, 414, 804, 814, ...

and with the updated USB PD protocol and power supply definition, this extends the applicability of USB PD to a large number of applications where 100W wasn’t adequate. The new USB PD architecture ...

Using this protocol, host systems can confirm the authenticity of a ... the recommended consumer and end-user terminology for USB Power Delivery (USB PD) is unchanged. USB Power Delivery 3.0, the new ...

While companies don't recommend using any charger other than their own, depending on your laptop, there may be another ...

Not only do I want to charge with a power supply that supports the PD protocol, but I also want to charge with a power supply that doesn't support it The TPS65987D will only support sinking power from ...

Can you provide debugging tools related to TPS65992? Program is also in the link above. Debugging tools you can use is any USB-PD protocol sniffer and I2C logic analyzer will be your best help here.