You need to use a laser which has the PWM/TTL control on a port different from the one used for the power. M106 S127 ; This line turns the laser ON to half power (50%) M106 S255 ; This line turns the ...

If the customer want to add TTL control, what should they do? 1) the preliminary preparation is shown as below, a MOS tube is connected in series. However, it was found that the TTL was 1KHz, even ...

Relating to the earlier post on TTL control of LM1084-adj, with Vin=28V, and Vout=26V, when I sink current from ADJ by grounding it, the output (Vout) drops to 17V. With these input and output ...

Create an instance of the Pinger with pingttl.New() Call .Ping() with a context and the address of the host you want to ping. Your entire application should have a single instance of Pinger. Store it ...

The attenuation range is 0 to 127 dB in 1 dB steps. This product offers low insertion loss, 20 microseconds switching speed and it has TTL control Solid State Reliability 30 MHz to 3 GHz Low Insertion ...

The TRF1123 is a highly integrated linear transmitter power amplifier MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit TTL control signals. The chip also ...

The controllers provide intensity control and on-off control via a toggle switch or TTL logic. The on-off time is < 25 µsecs when using TTL control. In addition to digital input control ...

Compact and easy to use flashgun that enables full Intelligent TTL (i-TTL) control for both FX and DX format cameras plus the Nikon Creative Lighting System. With bounce, swivel, zoom and even a ...