If the customer want to add TTL control, what should they do? 1) the preliminary preparation is shown as below, a MOS tube is connected in series. However, it was found that the TTL was 1KHz, even ...

Relating to the earlier post on TTL control of LM1084-adj, with Vin=28V, and Vout=26V, when I sink current from ADJ by grounding it, the output (Vout) drops to 17V. With these input and output ...

This board convert USB to RS485 and TTL on the same board. Thereby allowing the control of both RS485 and TTL based motors at one time. It can be used to control Robotis TTL and RS485 based motors at ...

The attenuation range is 0 to 127 dB in 1 dB steps. This product offers low insertion loss, 20 microseconds switching speed and it has TTL control Solid State Reliability 30 MHz to 3 GHz Low Insertion ...

Capture the response generated from the target machine using packet-sniffing tools such as Wireshark and watch the TTL and TCP window size. Open Wireshark on your Windows 10 machine, select the ...

The TRF1123 is a highly integrated linear transmitter power amplifier MMIC. The chip has two 16-dB gain steps that provide a total of 32-dB gain control via 1-bit TTL control signals. The chip also ...

The controllers provide intensity control and on-off control via a toggle switch or TTL logic. The on-off time is < 25 µsecs when using TTL control. In addition to digital input control ...