Careful selection is vital, with in this case a toroidal mains transformer and good quality capacitors being chosen. The choice between a linear power supply such as this one and a switching ...

Recently, significant progress has been made in the construction of the new energy industry chain in Turfan, Xinjiang. On ...

I can't find any CMRR/PSRR rejection for the PCM1795 DAC chip and I was wondering what is the worst acceptable power supply AC noise & ripple for the +3.3V and +5V voltages, peak-to-peak or RMS, ...

A signal transmitted from the power supply to the circuit board indicating that the power is stable. For various power supply definitions, see power supply. THIS DEFINITION IS FOR PERSONAL USE ONLY.

If there’s one thing that for decades of desktop PCs have given us, it’s a seemingly endless supply of relatively capable power supplies. If you need 5 volts or 12 volts at a respectable ...

In the datasheet in section 8.7 (Terminology and Application Assumptions) it states: "Good power-supply decoupling is required. Often a larger capacitor (2.2 µF, typical) is used along with a ...

Abstract: Low-dropout (LDO) regulators, which provide fast-transient response and good power supply ripple rejection, are indispensable in sys- tem-on-a-chip (SoC) designs. Conventional analog LDO ...

This supply is low current, typically only a few mA, but it must be very low noise because the microphone’s output levels are quite low and the buffer doesn’t have very good power supply ripple ...

The discrete solution uses a controller IC, external MOSFETs and passive components to build the power supply on the system board. A major reason to choose a discrete solution is low component bill of ...